Skip to content
Hitch & Sway

Hitches, Receivers & Ball Mounts

The Best Pintle Hitches and Pintle Hooks

If the trailer tongue ends in a steel ring instead of a coupler, no ball mount on earth will connect it. Here is the hardware that does, and how the two halves fit together.

By Brijon M.Last updated
Schematic plate showing a pintle hook jaw closed around a lunette ring - original illustration, not a product photo

Disclosure: we earn a commission if you buy through the Amazon links on this page, at no extra cost to you. Commission never decides a verdict or a ranking position - read our editorial policy and affiliate disclosure.

How we assessed these: Built from the specification tables Draw-Tite and Reese publish on their own part pages - capacity, gross tongue weight, receiver size, drop, height adjustment, shank length, mounting method and finish - each figure linked to the page it came from. This site installs nothing, tows nothing under instrumentation and publishes no measurements or scores of its own.

Short answer

A pintle setup is two parts: a hook, and something for the hook to mount to. If you tow a lunette-ring trailer now and then with a stock 2 in receiver, buy a hook already built onto a receiver shank - Draw-Tite publishes one at 10,000 lb with 2,000 lb of gross tongue weight, and it needs no drilling. If you tow several ring trailers at different heights, buy an adjustable pintle mount and bolt a hook to it. Your real ceiling is almost always the receiver and the truck, not the hook.

Pintle hardware is the part of towing where the search results fall apart, because the vocabulary is overloaded. A pintle hook is the jaw. A pintle mount is the plate or shank it bolts to. A lunette ring, sometimes called a ring eye or a drawbar eye, is the loop on the trailer that the jaw closes around. And a pintle combination is a single casting with both a hook and a ball, so one part couples either style of trailer.

The reason this matters commercially is simple: people buy the hook, discover it bolts to nothing they own, and then buy a mount as well - usually the wrong height. Getting the pair right the first time is the whole job.

Why a pintle at all

A ball coupler is a close-tolerance joint. It is quiet, it is easy to hitch alone, and it hates two things: dirt and extreme articulation. A pintle hook is the opposite. The ring sits loose in the jaw with deliberate slack, so the trailer can twist and pitch through a ditch, over a field edge or across a construction site without binding the connection. That slack is also why a pintle setup clunks - the noise people complain about is the design working.

  • Articulation. Off-road and job-site trailers see angles a ball coupler would jam at.
  • Tolerance of grit. A pintle jaw full of mud still closes and latches.
  • Capacity per dollar. Published pintle capacities run far above what bumper-pull ball mounts reach, because the hook is a simple forging.
  • It is what the trailer has. Military surplus, dump, farm and equipment trailers overwhelmingly ship with a lunette ring, and a ring cannot go on a ball.

Quick picks

Tap any row to jump to the full write-up. How these are chosen - and what we do and do not claim to know - is published in full on our research methodology page.

#ProductBest forOur readPrice
1
Schematic plate showing a pintle hook jaw closed around a lunette ring - original illustration, not a product photo

Draw-Tite Pintle Hook for a 2 in Receiver (10,000 lb)

Best overall

Towing a lunette-ring trailer occasionally with a stock receiver10,000 lb hook on a 2 in receiver shank, no drilling
Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

2
Schematic plate showing an adjustable pintle mounting plate with pinned height positions - original illustration, not a product photo

Draw-Tite Adjustable Pintle Mount for a 2 in Receiver (14,000 lb)

Best adjustable mount

One truck, several lunette-ring trailers at different heights14,000 lb, published height adjustment up to 10.5 in
Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

3
Schematic plate showing a combination pintle hook with a ball above the jaw - original illustration, not a product photo

Reese Towpower Pintle Hook and Ball Combination (16,000 lb hook)

Best hook and ball in one

A yard with both ring-eye and ball-coupler trailers16,000 lb hook plus a 14,000 lb 2-5/16 in ball
Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

4
Schematic plate showing a bolt-on pintle hook body and its mounting holes - original illustration, not a product photo

Draw-Tite Bolt-On Pintle Hook (20,000 lb)

Best bolt-on hook

Bolting to a plate or an adjustable pintle mount you already own20,000 lb and 4,000 lb tongue weight, 12.5 lb part
Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

5
Schematic plate showing a heavy pintle hook jaw and latch arm - original illustration, not a product photo

Draw-Tite Bolt-On Pintle Hook (30,000 lb)

Heaviest duty

Heavy equipment, dump and farm trailers with lunette rings30,000 lb hook, 6,000 lb published tongue weight
Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

How we picked: the criteria that separate pintle hardware

  1. Published capacity AND published gross tongue weight. Hooks are rated for both, and the tongue figure is the one that bites on a loaded dump trailer. Draw-Tite publishes 2,000 lb on the receiver-mounted hook, 4,000 lb on the 20,000 lb bolt-on and 6,000 lb on the 30,000 lb bolt-on.
  2. What it mounts to. A receiver-shank hook needs nothing but your existing 2 in receiver. A bolt-on hook needs a plate or an adjustable mount, and that is a second purchase. This is the question that decides whether your order is complete.
  3. Height adjustment, if you tow more than one ring trailer. Draw-Tite publishes its adjustable mount as adjusting up to 10.5 in with a 6.25 in drop. Ring height varies a lot between trailers, and a ring pulled at the wrong height loads the jaw unevenly.
  4. Weight of the part you will lift. The adjustable mount is published at 24.25 lb, the 20,000 lb hook at 12.5 lb and the 30,000 lb hook at 10.5 lb. A full receiver-mount assembly is a two-handed lift.
  5. Mounting hardware included. All three bolt-on parts here publish that their hardware is in the box. A hook with no bolts is a part you cannot fit.
  6. Whether it couples both styles. A hook-and-ball combination removes the swap for a yard that runs both ring and ball trailers, at the cost of a taller coupling height on the ball side.
  7. Published figures at all. Pintle parts are sold by a long tail of unbranded sellers with no specification table. For a part carrying 10,000 lb and above, an uncited capacity is not a specification.

The two mounting paths, and which one you are on

Look at the back of your vehicle, because this takes ten seconds and eliminates half the catalog.

What you have decides what you buy
What is on the vehicleWhat to buyWhat else you need
A standard 2 in receiver tubeA pintle hook on a 2 in receiver shankNothing - a hitch pin and clip
A 2 in receiver and several ring trailersAn adjustable pintle mountA bolt-on hook to go on it
A flat bumper plate or a welded pintle plateA bolt-on hook sized to the plate's ratingNothing, if the plate's bolt pattern matches
A ring trailer and a ball trailer in the same yardA hook-and-ball combinationA plate or adjustable mount to bolt it to

A bolt-on hook mounts to nothing on its own. If your order is a bolt-on hook and you do not already own a plate, the order is not finished.

The receiver path has a ceiling worth saying out loud. A hook rated 20,000 lb in a receiver rated 12,000 lb is a 12,000 lb assembly, and the receiver's label is the figure that governs. What the hitch classes and receiver ratings actually mean is the reference for reading that label, and the receiver size chart covers the 2 in against 2-1/2 in and 3 in tube question that comes up on heavier trucks.

Schematic plate showing a pintle hook jaw closed around a lunette ring - original illustration, not a product photo

1. Best overall

Draw-Tite Pintle Hook for a 2 in Receiver (10,000 lb)

Draw-Tite · Best for towing a lunette-ring trailer occasionally with a stock receiver

A pintle hook already built onto a 2 in receiver shank, rated 10,000 lb with a published 2,000 lb gross tongue weight. No plate, no bolts, no drilling: it slides into the receiver you already have, which is why it is the sane first pintle purchase for a pickup.

Published specifications

Capacity
10,000 lb source
Gross tongue weight
2,000 lb source
Receiver size
2 in square source
Shank length
10 in source
Hitch pin hole
0.625 in source
Finish
Black powder coat source
Drilling required
No source

What works

  • Goes in and out of a standard 2 in receiver in seconds, so the truck is normal again afterward
  • Published tongue weight of 2,000 lb, which is the figure a loaded equipment trailer tests
  • Nothing to bolt up, nothing to drill, nothing vehicle-specific to order

What does not

  • 10,000 lb is the lowest capacity of the pintle options here, and a loaded tandem equipment trailer eats that quickly
  • A receiver-mounted hook puts the load on the receiver's own rating, which is usually the real ceiling
  • Fixed height - there is no adjustment to level a trailer whose ring sits high or low

Skip it if

Not enough hook for heavy commercial work, and not usable at all if your trailer has a ball coupler rather than a lunette ring - the hook only couples to a ring.

Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

Raw specifications: Draw-Tite’s own page. We earn nothing on that link.

Schematic plate showing an adjustable pintle mounting plate with pinned height positions - original illustration, not a product photo

2. Best adjustable mount

Draw-Tite Adjustable Pintle Mount for a 2 in Receiver (14,000 lb)

Draw-Tite · Best for one truck, several lunette-ring trailers at different heights

The mount, not the hook. A cast shank with a bolt-on plate whose height Draw-Tite publishes as adjusting up to 10.5 in, rated 14,000 lb into a 2 in receiver with a 6.25 in drop. It is the part that lets one truck pull trailers whose rings sit at three different heights.

Published specifications

Capacity
14,000 lb source
Receiver size
2 in source
Height adjustment
Up to 10.5 in source
Drop length
6.25 in source
Plate size
3.625 in x 4.625 in source
Shank length
9.625 in source
Weight
24.25 lb source

What works

  • Published height adjustment up to 10.5 in, which is the whole reason to own an adjustable pintle mount
  • Knurled bolt pin with a lanyard, so the pin is attached rather than lost in the gravel
  • Takes a bolt-on hook or a hook-and-ball combination on the same shank

What does not

  • The hook is NOT included - budget for the hook as a second purchase
  • 24.25 lb of cast steel to lift in and out of the receiver
  • The published 14,000 lb rating is the mount's; your hook, receiver and vehicle each have their own and the lowest wins

Skip it if

Overkill if you tow one trailer at one height - a hook already built onto a receiver shank does that job for less money and less weight.

Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

Raw specifications: Draw-Tite’s own page. We earn nothing on that link.

Schematic plate showing a combination pintle hook with a ball above the jaw - original illustration, not a product photo

3. Best hook and ball in one

Reese Towpower Pintle Hook and Ball Combination (16,000 lb hook)

Reese Towpower · Best for a yard with both ring-eye and ball-coupler trailers

One casting that couples either a lunette ring or a 2-5/16 in coupler: Reese publishes 16,000 lb on the hook, 3,000 lb gross tongue weight, and 14,000 lb on the 2-5/16 in ball. If your yard has a ring-eye equipment trailer and a ball-coupler trailer, this is the part that stops you swapping hardware between them.

Published specifications

Hook capacity
16,000 lb source
Gross tongue weight
3,000 lb source
Ball capacity
14,000 lb source
Ball diameter
2.313 in (2-5/16 in) source
Ball shank diameter
1.25 in source
Mounting
Bolt-on; mounting hardware included, no receiver included source
Finish and weight
Black powder coat, 15 lb source

What works

  • Couples a ring or a 2-5/16 in coupler without changing hardware
  • Published figures for both functions separately, so neither is a guess
  • Mounting hardware is included, which bolt-on pintle parts often leave out

What does not

  • It is a bolt-on part, so it needs a plate or an adjustable pintle mount - no receiver is included
  • The ball sits above the hook jaw, which raises the coupling height on the ball side
  • Only a 2-5/16 in ball, so a 2 in coupler trailer still needs a different mount

Skip it if

Pointless if every trailer you own uses the same coupling type - buy the single-purpose part, which is lighter and cheaper.

Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

Raw specifications: Reese Towpower’s own page. We earn nothing on that link.

Schematic plate showing a bolt-on pintle hook body and its mounting holes - original illustration, not a product photo

4. Best bolt-on hook

Draw-Tite Bolt-On Pintle Hook (20,000 lb)

Draw-Tite · Best for bolting to a plate or an adjustable pintle mount you already own

A plain bolt-on hook rated 20,000 lb with a published 4,000 lb gross tongue weight, and at 12.5 lb it is the lightest serious hook here. Mounting hardware is included; the plate it bolts to is not, which is exactly how commercial pintle setups are assembled.

Published specifications

Capacity
20,000 lb source
Gross tongue weight
4,000 lb source
Mounting
Bolt-on; mounting hardware included, no receiver included source
Weight
12.5 lb source
Finish
Black powder coat source
Tool published
1/2 in socket source

What works

  • Doubles the capacity of the receiver-mounted hook for a fraction of the weight
  • 4,000 lb published tongue weight suits loaded equipment and dump trailers
  • Least expensive route into real pintle capacity if you already have something to bolt it to

What does not

  • No plate and no receiver shank - on its own it mounts to nothing
  • Fixed height once bolted, so ring height has to be right by design
  • Bolt torque is on you and the plate maker; the hook page publishes the socket size, not a torque figure

Skip it if

The wrong first purchase for a pickup owner with a bare receiver - without a pintle mounting plate there is nowhere for this to go.

Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

Raw specifications: Draw-Tite’s own page. We earn nothing on that link.

Schematic plate showing a heavy pintle hook jaw and latch arm - original illustration, not a product photo

5. Heaviest duty

Draw-Tite Bolt-On Pintle Hook (30,000 lb)

Draw-Tite · Best for heavy equipment, dump and farm trailers with lunette rings

The heaviest hook in this group: 30,000 lb with a published 6,000 lb gross tongue weight, and Draw-Tite lists it at 10.5 lb, lighter than the 20,000 lb hook. It is a commercial-duty part, and on a pickup the truck runs out of rating long before the hook does.

Published specifications

Capacity
30,000 lb source
Gross tongue weight
6,000 lb source
Mounting
Bolt-on; mounting hardware included, no receiver included source
Weight
10.5 lb source
Finish
Black powder coat source

What works

  • 30,000 lb published capacity takes the hook out of the equation entirely
  • 6,000 lb tongue weight rating covers heavy single-point loads
  • Lighter than the 20,000 lb hook despite the higher rating

What does not

  • Needs a plate rated to match, or the rating is decorative
  • Far beyond what any light-duty receiver or half-ton pickup can legally use
  • Bolt-on only, so there is no quick-release convenience

Skip it if

Not a pickup upgrade. If your truck is rated to tow 12,000 lb, a 30,000 lb hook changes nothing about what you can legally pull.

Check price on Amazon

#ad Affiliate link - we publish no price; Amazon shows the current one

Raw specifications: Draw-Tite’s own page. We earn nothing on that link.

Ring height, and the mistake that wears out a jaw

A lunette ring should be pulled close to level, the same way a ball coupler should. When the hook sits too low, the ring rides up the inside of the jaw and loads the latch rather than the hook throat. Too high, and the ring pulls down on the jaw's open side. Neither fails immediately; both wear the contact faces oval, and an oval jaw with a worn ring is how a connection eventually opens up.

This is the actual argument for an adjustable mount, and it is a stronger one than convenience. If the ring trailers in your yard sit at heights that differ by several inches - a flatbed, a dump trailer and an old farm wagon will - one fixed height cannot serve all three. Draw-Tite publishes its adjustable mount as covering up to 10.5 in of height, which is enough range to level all of them.

On chains specifically, heavy ring trailers are where people reuse whatever is in the toolbox. How chains and the breakaway system are supposed to be rated and arranged is worth re-reading before the first heavy pull, because the rules that apply to a 3,000 lb utility trailer are not the ones that apply to a loaded equipment trailer.

Brakes matter more here than almost anywhere

The trailers that use lunette rings are heavy, and heavy trailers come with brakes on every axle. If you are adding a pintle setup to a truck that has only ever pulled a light utility trailer, the brake side of the job is the part to get right: a controller matched to the number of axles, set up with real gain rather than a guess.

Start with whether your setup legally needs trailer brakes at all, then how to set gain so the trailer does the stopping. If there is no controller in the truck yet, the controller roundup covers proportional and time-delay units and what each does on a heavy trailer.

Who should not buy a pintle hitch

  • Anyone whose trailer has a ball coupler. A pintle hook cannot connect it, and converting a coupler to a ring is a fabrication job with liability attached. Trailer balls by size and rating is your page.
  • Half-ton owners chasing a bigger number. A 30,000 lb hook on a truck rated to pull 9,000 lb changes nothing legal or physical about what you can tow.
  • Anyone towing a travel trailer. Ring couplers are essentially absent from the RV world, and the quiet, low-slack ball connection is what you want for a camper anyway.
  • Anyone who needs weight distribution. Weight distribution systems work with a ball mount head, not with a pintle hook. If your tow vehicle squats, the weight distribution hub is the right starting point.
  • Anyone buying a bolt-on hook with nothing to bolt it to. Buy the mount first, or buy the receiver-shank hook instead.

A note on what is not here

CURT publishes a 10,000 lb pintle hook for 2-1/2 in and 3 in lunette rings, and its own page states that it mounts on a CURT adjustable pintle mount. That is a reasonable part if you already own the matching CURT mount, and it is not listed as a pick here because the mount's own specification page could not be read from the manufacturer's site while this page was assembled, and a hook whose required mount we cannot cite is half a recommendation. The same applies to the welded and fabricated pintle plates sold by regional truck equipment shops: usually good hardware, almost never a published rating at a stable URL.

Air-cushioned and shock-absorbing pintle hooks also exist, and they genuinely reduce the slapping that makes pintle towing unpleasant. Nothing in that category is listed here for the same reason - no published specification table we could cite from the maker.

The bottom line

For a pickup with a standard 2 in receiver and a ring trailer to move occasionally, the Draw-Tite hook on a receiver shank is the complete answer in one box: 10,000 lb, 2,000 lb of published tongue weight, no drilling, and the truck is back to normal in ten seconds when you are done. If the yard has several ring trailers, buy the adjustable mount and bolt the 20,000 lb hook to it - that pair covers a range of ring heights and more capacity than any light-duty receiver can use.

The combination hook and ball earns its place only if you genuinely alternate between ring and ball trailers; otherwise the single-purpose part is lighter and cheaper. And the 30,000 lb hook is a commercial part: buy it when the plate behind it is rated to match, not because the number is bigger.

Key takeaways

  • A pintle setup is a hook plus something to mount it to - a bolt-on hook alone mounts to nothing.
  • A hook on a 2 in receiver shank is the no-drilling path for a pickup that already has a receiver.
  • Published gross tongue weight matters as much as capacity: 2,000 lb, 4,000 lb and 6,000 lb across the three hooks here.
  • The receiver's label and the vehicle's rating are the real ceiling, not the hook's figure.
  • Pull the lunette ring close to level; a wrong height wears the jaw and the ring oval.
  • Draw-Tite publishes its adjustable pintle mount at 14,000 lb with height adjustment up to 10.5 in.
  • The slack that makes a pintle tough is also what makes it clunk - that is the design, not a defect.
  • Latch plus pin, every hitch-up, and chains rated for the loaded trailer.

Common questions

What is a pintle hitch?
A pintle hitch is a hook-and-ring connection rather than a ball-and-coupler one. The hook, called a pintle hook, closes around a steel loop on the trailer tongue called a lunette ring. The joint is deliberately loose so the trailer can articulate over rough ground, which is why pintle hardware is standard on dump, equipment, farm and military-surplus trailers.
Can I put a pintle hook in a regular 2 inch receiver?
Yes, if you buy a hook that is built onto a 2 in receiver shank - Draw-Tite publishes one at 10,000 lb capacity and 2,000 lb gross tongue weight that needs no drilling. A plain bolt-on hook cannot go in a receiver on its own; it needs a plate or an adjustable pintle mount first. Either way, the receiver's own rating label is the ceiling for the whole assembly.
How much can a pintle hitch tow?
The hooks here publish 10,000 lb, 16,000 lb, 20,000 lb and 30,000 lb, with gross tongue weights from 2,000 lb to 6,000 lb. Those are the hook's figures only. Your actual limit is the lowest published rating among the vehicle, the receiver or plate, the mount and the hook - on a pickup that is almost always the truck.
Why does my pintle hitch clunk so much?
Because the ring sits loose in the jaw by design, which is what lets the trailer twist and pitch over rough ground without binding. The noise is the clearance, not a fault, and it gets louder as the jaw and ring wear. Pulling the ring at a level height slows that wear down; so does keeping the jaw greased.
Do I need a special mount for a pintle hook?
Only if the hook is a bolt-on type, which most are. A bolt-on hook needs a pintle mounting plate or an adjustable pintle mount rated at least as high as the hook. If you want one purchase instead of two, buy a hook already built onto a receiver shank.

More in Hitches, Receivers & Ball Mounts

Class, receiver size, ball diameter, drop. Four numbers decide whether your setup is right, and three of them are stamped on parts you already own.

Schematic plate showing a receiver tube and drawbar in section - original illustration

Reference

Hitch Classes Explained

The class system from 1 to 5, the two ratings on every label, and the mistake of inferring capacity from tube size.

Schematic plate showing a square receiver tube and a drawbar inserted - original illustration

Reference

Receiver Sizes Chart

Tube sizes, pin hole diameters, what fits what, and the derating that comes with a reducer sleeve.

Schematic plate showing three trailer ball diameters and a coupler in section - original illustration, not a product photo

Best trailer hitch ball

Best Hitch Balls

Trailer balls for 1-7/8 in, 2 in and 2-5/16 in couplers compared on published capacity, shank diameter, mounting torque and finish - with the one mismatch that gets trailers loose.

An adjustable ball mount with two trailer balls fitted

Best hitch hardware

Best Trailer Hitches

What to buy for a 2 in receiver - mounts, balls, pins and anti-rattle hardware - and how to get the vehicle-specific receiver right.

A trailer coupler on a hitch ball with safety chains attached and crossed

Guide

Chains and Breakaway Cables

Chain rating and arrangement, breakaway switch wiring, and the maintenance step that decides whether either one works.

Found something out of date, or a figure you can source better than we did? Corrections get read first. How we research explains how these pages are put together, and contact is one click away.